Building Boost 32/64 on Windows: Difference between revisions

From NEOSYS Dev Wiki
Jump to navigationJump to search
(No difference)

Revision as of 04:11, 15 May 2011

Building boost x64 "release only" in windows from command line using ready icu binaries

Boost x64 binaries are not available from boost or not exactly the right tool version perhaps

  • Building boost x64 binaries requires icu x64 binaries which we have to make or get
  • NB building icu "release only" can be done from the command line with sdk only
  • Building icu debug version can be done from command line but requires a path to visual studio's bscmake (express will do)

Getting ICU's binary libraries

Here we get "release only" binaries from icu at http://site.icu-project.org/download

http://download.icu-project.org/files/icu4c/4.6/icu4c-4_6-Win64-msvc10.zip

and extract to

F:\icu4c-4_6-Win64-msvc10

check they are at the right level

dir F:\icu4c-4_6-Win64-msvc10\icu

Define ICU Location

set ICU64=F:\icu4c-4_6-Win64-msvc10\icu
rem set ICU64=F:\icu4c-4_6_1-src\icu
dir %ICU64%

Get Boost Source

To unzip boost files fast get 7-Zip.

http://www.7-zip.org/download.html

Get boost source and open in 7-Zip's File Manager

http://sourceforge.net/projects/boost/files/boost/1.46.1/boost_1_46_1.7z/download

Extract to F:\ so that subfolder isnt doubled up as f:\exodus_1_46_1\exodus_1_46_1\

f:\boost_1_46_1

or just get boost zip but Windows unzips *extremely* slowly

http://sourceforge.net/projects/boost/files/boost/1.46.1/boost_1_46_1.zip/download

Build Boost Builder

Install Windows SDK and get into a SDK command line and get into boost

f:
cd \boost_1_46_1

NOTE the boost builder "bjam" MUST be built in x86 mode!

setenv /x86 /Release
bootstrap

Check if Boost builds with ICU

First build the regex library only to check that icu is being used

setenv /x64 /Release
bjam variant=release --toolset=msvc-10.0 architecture=x86 address-model=64 -sICU_PATH=%ICU64% --with-regex stage --stagedir=stage64 -j2 -a

If it says HAS_ICU=NO then do the following work otherwise skip to final section and build all five boost binary libraries needed by Exodus

Work-around for "HAS_ICU BUILDS: NO"

bjam should not use the debug libraries while building regex so probably we can just use the release versions as debug to get around the icu detection!

cd icu\lib64
copy icuin.lib icuind.lib
copy icuuc.lib icuucd.lib

If the work-around doesnt work!

A boost build bug that tests for existence of *debug* version of ICU even when building release only version of boost. config.log will show you all the attempted linking including bin/bin64 lib/lib64 issues. also includes list of libraries in a @file

notepad bin\v2\config.log
notepad bin.v2\libs\regex\build\msvc-10.0\debug\address-model-64\architecture-x86\threading-multi\has_icu.exe.rsp
LINK : fatal error LNK1181: cannot open input file 'icuind.lib'

maybe your ICU_PATH IS WRONG

Build Boost with ICU

setenv /x64 /Release
bjam variant=release --toolset=msvc-10.0 architecture=x86 address-model=64 -sICU_PATH=%ICU64% --with-date_time --with-filesystem --with-regex --with-system --with-thread stage --stagedir=stage64 -j2 -a
dir stage64\lib

Building Boost 32/64/Debug/Release

If you have acquired or built a complete set of 32/64/release/debug libraries then you can build the same for boost and therefore can build Exodus in any configuration or platform.

set ICU32=icu4c-4_6_1-src
set ICU64=icu4c-4_6_1-src

setenv /x64
bjam --toolset=msvc-10.0 architecture=x86 address-model=64 -sICU_PATH=%ICU64% --with-date_time --with-filesystem --with-regex --with-system --with-thread stage --stagedir=stage64 -j2 -a
dir stage64\lib

setenv /x86
bjam --toolset=msvc-10.0 architecture=x86 address-model=64 -sICU_PATH=%ICU32% --with-date_time --with-filesystem --with-regex --with-system --with-thread stage --stagedir=stage32 -j2 -a
dir stage32\lib