Manual: Difference between revisions

From NEOSYS Dev Wiki
Jump to navigationJump to search
Line 232: Line 232:
Exodus allows many classic multivalue basic external subroutines and functions to be reimplemented as internal subroutines and functions. This means that you can now, where appropriate, keep all source code related to one and only one program in a single file. This is a major improvement in source code management.
Exodus allows many classic multivalue basic external subroutines and functions to be reimplemented as internal subroutines and functions. This means that you can now, where appropriate, keep all source code related to one and only one program in a single file. This is a major improvement in source code management.


In classic multivalue basic, if you wanted to implement some function to be used in expression you were forced to implement it as an external function requiring a separate source code file.
In classic multivalue basic, if you wanted to implement some function to be used in expressions you were forced to implement it as an external function requiring a separate source code file.


In classic multivalue basic if you wanted to call a subroutine with parameters, or you wanted to be sure that a subroutine would not accidentally overwrite main program variables, you were forced to implement it as an external subroutine or function.
In classic multivalue basic if you wanted to call a subroutine with parameters, or you wanted to be sure that a subroutine would not accidentally overwrite main program variables, you were forced to implement it as an external subroutine or function.

Revision as of 00:47, 29 October 2010

Hello World

After installing Exodus, you can develop Exodus programs from any operating system command line.

This introduction concentrates on simple development from the command line because it is common to all platforms.

Edit

Use Exodus's all-in-one editor+compiler+cataloger 'edic'

edic hello1

edic will give you a skeleton Exodus program which you can develop as you wish.

There must be one and only one "function main()" statement and this is run when the program is started.

By convention, main() must return an integer value. If desired, this can be used to indicate "success" with zero or "failure" with some error number.

The programinit() and programexit() lines are required and provide all the standard multivalue system variables using a simple C++ class macro.

#include <exodus/program.h>

programinit()

function main() {
        printl("hello1 says 'Hello World!'");
        return 0;
}

programexit()

Save and compile

Make any changes you fancy to the skeleton and save it.

NB Even if you just want to try out the skeleton program exactly as it is without any changes, you must still explicitly save it - otherwise, if you just exit without saving, edic will assume you didn't want a hello1 program, and will cancel. For the default editor (nano), explicit save is usually Ctrl+O.

Upon saving hello1, edic will compile and catalog it.

Run

To run/open/execute your new hello1 program just type its name.

hello1

and the output is ...

hello1 says 'Hello World!'

Deployment of Compiled Programs

All programs you develop with Exodus's edic or compile commands are stored in the same directory as their source code. They are also copied to a folder in your home directory. This folder is called "Exodus" on Windows and bin or lib on other operating systems.

On Windows, the user who installs Exodus can run any program they develop in Exodus by typing its name at any command prompt. It does not matter what the current working directory is because the Exodus installer permanently adds the Exodus home program directory to the PATH of the user who installs it.

Users other than the user who installed Exodus on Windows, and all users on Linux, Mac or other operating systems, must type "exodus" at a command prompt (or open an Exodus console from an application menu) before they can run any program they develop in Exodus. Once they have done that, it does not matter what the current working directory is because the "exodus" program temporarily adds the Exodus home program directory to the users PATH.

On all operating systems, if there is a similarly named program earlier on in your path (e.g. operating system commands) then you will not be able to run your program because in all cases Exodus adds its path (to your home program directory) to the end of your existing path - not the beginning.

To make any developed Exodus programs available to other users you must arrange for them to be copied to some directory on their path.

Local subroutines

To simulate classic multivalue basic's "gosub/return" in Exodus, you can add additional subroutines and functions between the programinit() and programexit() lines.

You can add them either above or below the "main" function. There is no rule that functions must appear before or above the code that calls them.

Subroutines and functions cannot be nested otherwise compilation will fail. In other words, no function or subroutine can be contain within the body of another.

Simple Example

Here is hello1 modified to call a subroutine that says something.

The word "gosub" is just there for classical clarity. It could be omitted. It could also be replaced by "call" which is also a throwaway word. While gosub and call are interchangeable, if you are going to use them at all, it is probably a good idea to use "gosub funcx()" to indicate internal subroutines and "call funcx()" to indicate external subroutines.

#include <exodus/program.h>

programinit()

function main() {
        printl("hello1 says 'Hello World!'");

        gosub subr1();

        return 0;
}

subroutine subr1() {
        printl("subr1 says 'Hello'");
}

programexit()

output:

hello1 says 'Hello World!'
subr1 says 'Hello'

Subroutine and Function Parameters (Arguments)

Parameter names must be prefixed by "in", "out" or "io" to indicate if they are inbound, outbound or both.

Inbound parameters (prefixed with "in") cannot be amended within the function and the compiler will enforce this. This provides a guarantee to the programmer calling the subroutine or functions that their inbound parameters will not be modified by calling the function. Inbound parameters may be provided by the calling program either as a variable or as raw data like "xyz" or 123 etc.

In/Outbound parameters ("io") must be provided by the calling program in the form of a variable and not raw data. The function can both read and write into these parameters.

Outbound parameters ("out") indicate to the programmer using the function how it works. However, outbound parameters do not actually prevent them being used to provide data to the subroutine or function and are therefore no different from in/outbound parameters. There is no simple way to enforce "write only" parameters using the underlying C++ language.

For special cases, or where performance is critical, the usual C++ parameters are also allowed for example "int arg1" or "const char* arg2" etc.

External functions and subroutines

Editing and compiling external subroutines and functions in Exodus is identical to normal programs except:

  1. the word "program" becomes "library" so we have "library.h", "libraryinit()" and "libraryexit()".
  2. function main can have any parameters you like, for example: "function main(in arg1, in arg2, out arg3)

NB The name of the function internally MUST be main and not the name of the function so we still have "function main(...)" but this time it can have parameter names eg "subroutine main(in instr1, out outstr2)".

External functions and subroutines are implemented as dll or so files and are only loaded into memory the first time that they are used. A missing function or subroutine so or dll file will not cause any failure unless and until it is first used.

Example func1

edic func1
#include <exodus/library.h>

libraryinit()

function main(in arg1, out arg2) {
        printl("func1 says 'Hello World!'");
        arg2="arg1 was "^arg1;
        return 999;
}

libraryexit()

Example prog1 using func1

Compiling func1 created a func1.h file that is required to "glue" func1 into any program that wants to use func1.

To use func1 in any program or external subroutine or function, you need to insert an #include "func1.h" somewhere between "programinit()" and "programexit()" - and not within the body of any function or subroutine.

edic prog1
#include <exodus/program.h>

programinit()

//you must "declare" that we want to use func1
#include "func1.h"

function main() {
        printl("prog1 says 'Hello World!'");

        //we print what func1 returns, and also what func1 returns in arg2
        var arg2;
        printl(   func1("myarg1",arg2)   );
        printl(arg2);

        return 0;
}

programexit()

run prog1

prog1

output:

prog1 says 'Hello World!'
func1 says 'Hello World!'
999
arg1 was myarg1

Functions versus Subroutines

Functions can be used anywhere an expression would be used whereas subroutines can only be used as statements.

The same principle applies to both internal and external subroutines/functions.

Both subroutines and functions can return information in any of their "out" or "io" arguments.

The word "call" or "gosub" before the use of a function or subroutine is optional and can be omitted.

Functions

Functions return a value so the calling program can use a function anywhere an expression is required, for example on the right hand side of an assignment.

var yy=funcx(xx);

Even though a function returns a value, the value it returns can be ignored.

call funcx(xx);
gosub funcx(xx);
funcx(xx);

Subroutines

Subroutines do not return a value so they can only be used as statements.

call subrx(xx);   
gosub subrx(xx);  
subrx(xx);        
var yy=subrx(xx); //will not compile

Differences between Exodus's Internal Subroutines and Functions and those of classic multivalue basic

Exodus's internal subroutines and functions are very different from and arguably much better than classic multivalue internal subroutines. They are very similar to external subroutines and functions except they also have access to the global variables of the main program.

Exodus Internal Subroutines and Functions:

  1. can be called with parameters e.g. gosub funcx(xx,yy,zz)
  2. only have access to the main programs global variables - this eliminates a major category of multivalue bugs
  3. functions (not subroutines) can return a result e.g. abc=funcx(xx,yy,zz)

They only have one entry point whereas in classic multivalue basic you can jump into the middle of any internal subroutine. To simulate this type of coding in in Exodus you must create nested subroutines or functions.

The old RETURN TO XYZ syntax is not supported at all and such code must be redesigned to eliminate it.

Moving external subroutines and functions to internal

Exodus allows many classic multivalue basic external subroutines and functions to be reimplemented as internal subroutines and functions. This means that you can now, where appropriate, keep all source code related to one and only one program in a single file. This is a major improvement in source code management.

In classic multivalue basic, if you wanted to implement some function to be used in expressions you were forced to implement it as an external function requiring a separate source code file.

In classic multivalue basic if you wanted to call a subroutine with parameters, or you wanted to be sure that a subroutine would not accidentally overwrite main program variables, you were forced to implement it as an external subroutine or function.

In Exodus the above situations no longer force you to have separate compilation and source files. However you can still make subroutines and functions external exactly as before where that is the best strategy, for example:

  1. to provide some common feature to more than one program
  2. to avoid having to recompile the whole of a large program when you just change part of it
  3. where there is some benefit in not loading all the parts of a program into memory immediately on start-up.

NB Exodus internal subroutines and functions have access to the global variables of the main program so you might want them to make them external to make sure that there is no risk that they touch any global variable.

Operators

Operator Precedence

operators associativity
X++  X--  ()  .   right
++X  --X  +  -  not left
*  /  % right
+  - right
lt  le  ge  gt right
eq  ne right
^ (concatenate) right
and right
or right
=  +=  -=  *=  /= &nbsp%=  ^= left

Logical and comparative operators

word symbolic
alternative
example
and && if (aa and bb)
or || if (aa or bb)
not ! if (not aa)
eq == if (aa eq bb)
ne != if (aa ne bb)
gt > if (aa gt bb)
lt < if (aa lt bb)
le <= if (aa le bb)
ge >= if (aa ge bb)

and/or short circuiting

If the left hand side of an "or" operator is true then the right hand side is not even evaluated. Likewise if the left hand side of an "and" operator is false then the right hand side is not even evaluated.

if (aa eq 1 and bb eq 1) // if aa is not 1 then bb is not checked and could even be unassigned.
if (aa eq 1 or bb eq 1)  // if aa is 1 then bb is not checked and could even be unassigned.

ICONV/OCONV PATTERNS

Decimal (MD/MC)

1234 MD2 12.34
1234 MD20 1234.00
1234 MD20, 1,234.00
1234.5678 MD2 12.35
1234.5678 MD20 1234.57
1234.5678 MD20, 1,234.57
1234 MC2 12,34
1234 MC20 1234,00
1234 MC20, 1.234,00
1234 MD20- 1234.00


Date (D)

12345 D 18 OCT 2001
12345 D/ 10/18/2001
12345 D- 10-18-2001
12345 D2 18 OCT 01
12345 D/E 18/10/2001
12345 DS 2001 OCT 18
12345 DS/ 2001/10/18
12345 DM 10
12345 DMA OCTOBER
12345 DY 2001
12345 DY2 01
12345 DD 18
12345 DW 4
12345 DWA THURSDAY
12345 DQ 4
12345 DJ 291
12345 DL 31


Time (MT)

234800 MT 17:13
234800 MTH 05:13PM
234800 MTS 17:13:20
234800 MTHS 05:13:20PM
0 MT 00:00
0 MTH 12:00AM
0 MTS 00:00:00
0 MTHS 12:00:00AM


Text (L/R/T)

abcd L#3 abc
ab L#3 ab␣
abcd R#3 bcd
ab R#3 ␣ab
ab T#3 ab␣
abcd T#3 abc™d␣␣
42 L(0)#5 42000
42 R(0)#5 00042
42 T(0)#5 42000

Hex (HEX/MX)

ab HEX 00610062
15 MX F
254 MX FE
255 MX FF
256 MX 100
27354234 MX 1A1647A

Dictionaries

Exodus dictionaries enable classic multivalue database data definition. Dictionaries are just normal Exodus multivalue files that contain one record for each data column definition. You can use Exodus's edir program to manually edit dictionaries.

Dictionary file names must start with the word "dict_". For example, if you have a "books" file, then you will probably have a "dict_books" file.

You can list the contents of a dictionary by typing "list dict_filename".

Exodus Dictionary Format

0 DICTID Field/Column Code
1 DICTTYPE "F" or "S" : "F" means use Field No (i.e. raw data) and "S" means use Source Code (i.e. a function).
2 FIELDNO Field number (0=key, 1=field 1 etc for "Fields"
3 TITLE Title on reports
4 SM S or M or Mnn : "Single Value" or "Multivalue" or "Multivalue Group nn"
5 MAIN 1 indicates main field no for documentation etc
6
7 CONVERSION Conversion (MD/MT/D etc.)
8 SOURCE Source Code (of a function to calculate the field)
9 JUST "L" or "R" or "T" requesting left, right or text justification
10 WIDTH Column Width on fixed width reports

Sort/Select Command

Exodus provides the classic multivalue sort/select command within any Exodus program followed by readnext().

Classic multivalue select/readnext functions only provide the keys of the selected records. Exodus provides the classic select/readnext and also selectrecords/readnextrecord which provides complete records instead of just keys.

The format of the select/sselect command is as follows:

 SELECT|SSELECT

 {max_number_of_records}

 {using filename}

 filename

 {datakeyvalue} ...

 {BY|BY-DSND fieldname} ...
 
 {

  WITH

  {NO|ALL|ANY}

  dict_field_id

  {
   CONTAINING|STARTING|ENDING|LIKE|EQ|NE|NOT|GT|LT|GE|LE=|<>|>|<|>=|<= value(s)
   |
   BETWEEN value AND value
  }

  {AND|OR}

 } ...

(where "value" is any string quoted with " or ' or numbers)

Traditional Multivalue Functions and Statements (non-OO)

Exodus clones traditional multivalue function and statement behaviour and retains their syntax as far as possible.

  • Traditional functions are rendered as Exodus functions.
  • Traditional statements are rendered as Exodus subroutines.

String Commands

The use of most of Exodus's subroutines and functions will be obvious to traditional multivalue programmers. Ηοwever there are many ending in "-er" for example "converter()" which are slightly novel. All Exodus's "-er" statements are designed to modify strings IN PLACE instead of returning new strings. They therefore correspond to the old multivalue string manipulation commands.

For example, the efficient classic multivalue "modify in-place" string conversion command:

CONVERT 'ab' TO 'cd' IN ZZ

is now represented in Exodus by:

converter(zz,"ab","cd");

Traditional multivalue basic did not provide a full set of in-place string modification commands leading to inefficiencies. For example, traditional multivalue basic has a TRIM() function which returns a new string. However there was no TRIM X statement which would modify the string in-place which in many cases would be much faster.

To solve this problem, Exodus provides a complete set of in-place string modification "command functions" with the characteristic ending "-er". For example Exodus's fieldstorer() modifies the string in-place whereas fieldstore() returns a new string which is commonly .

Function Types

TYPE FUNCTION TYPE
var= traditional functions that return values and can be used in expressions and be on the right hand side of assignments
if traditional conditional statements that started with if or ended with then or else (or could have)
cmd traditional commands with no outputs
cmd2 traditional commands that had parameters on the left hand side of the = assigments (or -er functions)

Parameters Types

in
or blank
Parameters that provide data to the function. Can be variables or raw data like 1 or "X"
io Parameters that may provide and/or return data. Must be variables. Cannot be raw data like 1 or "X"
out Parameters that return data. Must be variables. Cannot be raw data like 1 or "X"

Optional Parameters

Key Default
="" ""
=" " " "
="." "."
=1 1
=0 0
=true true
=false false

Complete List of Functions

Environment
var= osgetenv(envname)
if osgetenv(envname, out value)
if ossetenv(envname, newvalue)
Time/Date/Sleep
var= date()
var= time()
var= datetime()
cmd ossleep(milliseconds)
var= ostime()


System File
if osopen(filename, out filehandle)
cmd osclose(filehandle)
var= osbread(filehandle, startoffset, length)
cmd osbread(out data, filehandle, startoffset, length)
cmd osbwrite(data, filehandle, startoffset)
if osread(out data, osfilename)
var= osread(osfilename)
if oswrite(data, osfilename)
if osdelete(osfilename)
if osrename(oldosfilename, newosfilename)
if oscopy(fromosdir_or_filename, newosdir_or_filename)
cmd osflush()


System Directory
var= oslist(path=".", wildcard="", mode=0)
var= oslistf(path=".", wildcard="")
var= oslistd(path=".", wildcard="")
var= osfile(filename)
var= osdir(filename)
if osmkdir(newdirname)
if osrmdir(dirname, evenifnotempty=false)
var= oscwd()
var= oscwd(newdirname)
Program Control
var= suspend(command)
var= osshell(command)
var= osshellread(command)
cmd osshellread(out commandoutput, command)
cmd osshellwrite(commandinput, command)
cmd stop(text="")
cmd abort(text)
var= perform(command)
var= execute(command)
var= chain(command)
var= logoff()
cmd debug()


Status
if assigned(anyvar)
if unassigned(anyvar)
Console Output
cmd print(instring)
cmd printl(instring="")
cmd printt(instring="")
Cursor
var= at(column0orcode)
var= at(column0, row0)
var= getcursor()
cmd setcursor(cursorstr)
var= getprompt()
cmd setprompt(promptchar)
Console Input
var= input()
var= input(out inputstr)
var= input(prompt, out inputstr)
var= inputn(n)
Math
var= rnd(number)
cmd initrnd(seednumber)
var= mod(dividend, divisor)
var= abs(number)
var= pwr(base, exponent)
var= exp(power)
var= sqrt(number)
var= sin(degrees)
var= cos(degrees)
var= tan(degrees)
var= atan(degrees)
var= loge(number)
var= integer(number)
var= floor(number)
var= round(number, ndecimals=0)
String Creation
var= chr(integer)
var= str(instring, number)
var= space(number)


String Info/Search
var= count(instring, substr)
var= dcount(instring, substr)
var= index(instring, substr, startcharno=1)
var= len(instring)
var= length(instring)
if match(instring, matchstr, options="")
var= seq(inchar)
String Functions
var= convert(instring, oldchars, newchars)
var= crop(instring)
var= field(instring, sepchar, fieldno, nfields=1)
var= field2(instring, sepchar, fieldno, nfields=1)
var= fieldstore(instring, sepchar, fieldno, nfields, replacementstr)
var= lcase(instring)
var= ucase(instring)
var= lower(instring)
var= raise(instring)
cmd2 quote(instring)
cmd2 unquote(instring)
var= splice(instring, fromcharno, nchars, insertionstr)
var= substr(instring, fromcharno)
var= substr(instring, fromcharno, nchars)
var= swap(instring, oldstr, newstr, options="")
var= trim(instring, trimchar=" ")
var= trimb(instring, trimchar=" ")
var= trimf(instring, trimchar=" ")
String Commands
cmd2 converter(io instring, oldchars, newchars)
var= cropper(io instring)
cmd2 fieldstorer(io instring, sepchar, fieldno, nfields, replacementstr)
cmd2 lcaser(io instring)
var= ucaser(io instring)
cmd2 lowerer(io instring)
cmd2 raiser(io instring)
cmd2 quoter(io instring)
cmd2 unquoter(io instring)
cmd2 splicer(io instring, fromcharno, nchars, insertion)
var= substrer(io instring, fromcharno)
var= substrer(io instring, fromcharno, nchars)
cmd2 swapper(io instring, oldstr, newstr, options="")
cmd2 trimmer(io instring, trimchar=" ")
cmd2 trimmerb(io instring, trimchar=" ")
cmd2 trimmerf(io instring, trimchar=" ")
iconv/oconv
var= oconv(instring, conversion)
var= oconv(instring, conversion)
var= iconv(instring, conversion)
var= iconv(instring, conversion)


Database
if connect(connectionstring="")
if disconnect()
if createfile(filename, options="")
if deletefile(filename)
if clearfile(filename)
var= listfiles()
if createindex(filename, fieldname, dictfilename="")
if deleteindex(filename, fieldname)
var= listindexes(filename)
if begin()
if rollback()
if end()


Database Files and Records
if open(filename, out filehandle)
if read(out record, filehandle, key)
if readv(out record, filehandle, key, fieldnumber)
if write(record, filehandle, key)
if writev(record, filehandle, key, fieldn)
if deleterecord(filehandle, key)
if updaterecord(record, filehandle, key)
if insertrecord(record, filehandle, key)
if lock(filehandle, key)
cmd unlock(filehandle, key)
cmd unlockall()
Record Selection
if select(sortselectclause="")
cmd clearselect()
if readnext(out key)
if readnext(out key, out valueno)
if selectrecord(sortselectclause="")
if readnextrecord(out key, out record)


Dictionary
var= calculate(fieldname)
var= xlate(filename, key, fieldno, mode)


Dynamic Array Functions
var= replace(instring, fieldno, replacement)
var= replace(instring, fieldno, valueno, replacement)
var= replace(instring, fieldno, valueno, subvalueno, replacement)
var= extract(instring, fieldno=0, valueno=0, subvalueno=0)
var= erase(instring, fieldno, valueno=0, subvalueno=0)
var= insert(instring, fieldno, insertion)
var= insert(instring, fieldno, valueno, insertion)
var= insert(instring, fieldno, valueno, subvalueno, insertion)
if locate(instring, target, out setting, fieldn=0, valuen=0)
if locateby(instring, target, ordercode, out setting, fieldn=0, valuen=0)
if locateusing(instring, target, usingchar, out setting, fieldn=0, valuen=0, subvaluen=0)
if locateusing(instring, target, usingchar)
var= remove(fromstr, io startx, out delimiterno)
var= sum(instring, sepchar=VM_)
Dynamic Array Commands
cmd2 replacer(io instring, fieldno, replacement)
cmd2 replacer(io instring, fieldno, valueno, replacement)
cmd2 replacer(io instring, fieldno, valueno, subvalueno, replacement)
cmd2 inserter(io instring, fieldno, insertion)
cmd2 inserter(io instring, fieldno, valueno, insertion)
cmd2 inserter(io instring, fieldno, valueno, subvalueno, insertion)
cmd2 eraser(io instring, fieldno, valueno=0, subvalueno=0)